Module bollard::secret

Secret API: manage and inspect docker secrets within a swarm

Structs

• Address
  Address represents an IPv4 or IPv6 IP address.
• AuthConfig
• BuildCache
• BuildInfo
• BuildPruneResponse
• ClusterInfo
  ClusterInfo represents information about the swarm as is returned by the "/info" endpoint. Join-tokens are not included.
• Commit
  Commit holds the Git-commit (SHA1) that a binary was built from, as reported in the version-string of external tools, such as containerd, or runC.
• Config
• ConfigSpec
• ContainerChangeResponseItem
  change item in response to ContainerChanges operation
• ContainerConfig
  Configuration for a container that is portable between hosts. When used as ContainerConfig field in an image, ContainerConfig is an optional field containing the configuration of the container that was last committed when creating the image. Previous versions of Docker builder used this field to store build cache, and it is not in active use anymore.
• ContainerCreateResponse
  OK response to ContainerCreate operation
• ContainerInspectResponse
• ContainerPruneResponse
• ContainerState
  ContainerState stores container’s running state. It’s part of ContainerJSONBase and will be returned by the "inspect" command.
• ContainerSummary
• ContainerSummaryHostConfig
• ContainerSummaryNetworkSettings
  A summary of the container’s network settings
• ContainerTopResponse
  OK response to ContainerTop operation
• ContainerUpdateResponse
  OK response to ContainerUpdate operation
• ContainerWaitExitError
  container waiting error, if any
• ContainerWaitResponse
  OK response to ContainerWait operation
• CreateImageInfo
• DeviceMapping
  A device mapping between the host and container
• DeviceRequest
  A request for devices to be sent to device drivers
• DistributionInspect
  Describes the result obtained from contacting the registry to retrieve image metadata.
• Driver
  Driver represents a driver (network, logging, secrets).
• EndpointIpamConfig
  EndpointIPAMConfig represents an endpoint’s IPAM configuration.
• EndpointPortConfig
• EndpointSettings
  Configuration for a network endpoint.
• EndpointSpec
  Properties that can be configured to access and load balance a service.
• EngineDescription
  EngineDescription provides information about an engine.
• EngineDescriptionPlugins
• ErrorDetail
• ErrorResponse
  Represents an error.
• EventActor
  Actor describes something that generates events, like a container, network, or a volume.
• EventMessage
  EventMessage represents the information an event contains.
• ExecConfig
• ExecInspectResponse
• ExecStartConfig
• GenericResourcesInner
• GenericResourcesInnerDiscreteResourceSpec
• GenericResourcesInnerNamedResourceSpec
• GraphDriverData
  Information about the storage driver used to store the container’s and image’s filesystem.
• Health
  Health stores information about the container’s healthcheck results.
• HealthConfig
  A test to perform to check that the container is healthy.
• HealthcheckResult
  HealthcheckResult stores information about a single run of a healthcheck probe
• HistoryResponseItem
  individual image layer information in response to ImageHistory operation
• HostConfig
  Container configuration that depends on the host we are running on
• HostConfigLogConfig
  The logging configuration for this container
• IdResponse
  Response to an API call that returns just an Id
• ImageDeleteResponseItem
• ImageId
  Image ID or Digest
• ImageInspect
  Information about an image in the local image cache.
• ImageInspectMetadata
  Additional metadata of the image in the local cache. This information is local to the daemon, and not part of the image itself.
• ImageInspectRootFs
  Information about the image’s RootFS, including the layer IDs.
• ImagePruneResponse
• ImageSearchResponseItem
• ImageSummary
• IndexInfo
  IndexInfo contains information about a registry.
• Ipam
• IpamConfig
• JoinTokens
  JoinTokens contains the tokens workers and managers need to join the swarm.
• Limit
  An object describing a limit on resources which can be requested by a task.
• ListSecretsOptions
  Parameters used in the List Secret API
• ManagerStatus
  ManagerStatus represents the status of a manager. It provides the current status of a node’s manager component, if the node is a manager.
• Mount
• MountBindOptions
  Optional configuration for the bind type.
• MountPoint
  MountPoint represents a mount point configuration inside the container. This is used for reporting the mountpoints in use by a container.
• MountTmpfsOptions
  Optional configuration for the tmpfs type.
• MountVolumeOptions
  Optional configuration for the volume type.
• MountVolumeOptionsDriverConfig
  Map of driver specific options
• Network
• NetworkAttachmentConfig
  Specifies how a service should be attached to a particular network.
• NetworkConnectRequest
• NetworkContainer
• NetworkCreateRequest
• NetworkCreateResponse
• NetworkDisconnectRequest
• NetworkPruneResponse
• NetworkSettings
  NetworkSettings exposes the network settings in the API
• NetworkingConfig
  NetworkingConfig represents the container’s networking configuration for each of its interfaces. It is used for the networking configs specified in the docker create and docker network connect commands.
• Node
• NodeDescription
  NodeDescription encapsulates the properties of the Node as reported by the agent.
• NodeSpec
• NodeStatus
  NodeStatus represents the status of a node. It provides the current status of the node, as seen by the manager.
• ObjectVersion
  The version number of the object such as node, service, etc. This is needed to avoid conflicting writes. The client must send the version number along with the modified specification when updating these objects. This approach ensures safe concurrency and determinism in that the change on the object may not be applied if the version number has changed from the last read. In other words, if two update requests specify the same base version, only one of the requests can succeed. As a result, two separate update requests that happen at the same time will not unintentionally overwrite each other.
• OciDescriptor
  A descriptor struct containing digest, media type, and size, as defined in the OCI Content Descriptors Specification.
• OciPlatform
  Describes the platform which the image in the manifest runs on, as defined in the OCI Image Index Specification.
• PeerNode
  Represents a peer-node in the swarm
• Platform
  Platform represents the platform (Arch/OS).
• Plugin
  A plugin for the Engine API
• PluginConfig
  The config of a plugin.
• PluginConfigArgs
• PluginConfigInterface
  The interface between Docker and the plugin
• PluginConfigLinux
• PluginConfigNetwork
• PluginConfigRootfs
• PluginConfigUser
• PluginDevice
• PluginEnv
• PluginInterfaceType
• PluginMount
• PluginPrivilege
  Describes a permission the user has to accept upon installing the plugin.
• PluginSettings
  Settings that can be modified by users.
• PluginsInfo
  Available plugins per type.

  
  

  > Note: Only unmanaged (V1) plugins are included in this list. > V1 plugins are "lazily" loaded, and are not returned in this list > if there is no resource using the plugin.
• Port
  An open port on a container
• PortBinding
  PortBinding represents a binding between a host IP address and a host port.
• ProcessConfig
• ProgressDetail
• PushImageInfo
• RegistryServiceConfig
  RegistryServiceConfig stores daemon registry services configuration.
• ResourceObject
  An object describing the resources which can be advertised by a node and requested by a task.
• Resources
  A container’s resources (cgroups config, ulimits, etc)
• ResourcesBlkioWeightDevice
• ResourcesUlimits
• RestartPolicy
  The behavior to apply when the container exits. The default is not to restart. An ever increasing delay (double the previous delay, starting at 100ms) is added before each restart to prevent flooding the server.
• Runtime
  Runtime describes an OCI compliant runtime. The runtime is invoked by the daemon via the containerd daemon. OCI runtimes act as an interface to the Linux kernel namespaces, cgroups, and SELinux.
• Secret
• SecretSpec
• Service
• ServiceCreateResponse
• ServiceEndpoint
• ServiceEndpointVirtualIPs
• ServiceJobStatus
  The status of the service when it is in one of ReplicatedJob or GlobalJob modes. Absent on Replicated and Global mode services. The JobIteration is an ObjectVersion, but unlike the Service’s version, does not need to be sent with an update request.
• ServiceServiceStatus
  The status of the service’s tasks. Provided only when requested as part of a ServiceList operation.
• ServiceSpec
  User modifiable configuration for a service.
• ServiceSpecMode
  Scheduling mode for the service.
• ServiceSpecModeReplicated
• ServiceSpecModeReplicatedJob
  The mode used for services with a finite number of tasks that run to a completed state.
• ServiceSpecRollbackConfig
  Specification for the rollback strategy of the service.
• ServiceSpecUpdateConfig
  Specification for the update strategy of the service.
• ServiceUpdateResponse
• ServiceUpdateStatus
  The status of a service update.
• Swarm
• SwarmInfo
  Represents generic information about swarm.
• SwarmInitRequest
• SwarmJoinRequest
• SwarmSpec
  User modifiable swarm configuration.
• SwarmSpecCaConfig
  CA configuration.
• SwarmSpecCaConfigExternalCAs
• SwarmSpecDispatcher
  Dispatcher configuration.
• SwarmSpecEncryptionConfig
  Parameters related to encryption-at-rest.
• SwarmSpecOrchestration
  Orchestration configuration.
• SwarmSpecRaft
  Raft configuration.
• SwarmSpecTaskDefaults
  Defaults for creating tasks in this cluster.
• SwarmSpecTaskDefaultsLogDriver
  The log driver to use for tasks created in the orchestrator if unspecified by a service. Updating this value only affects new tasks. Existing tasks continue to use their previously configured log driver until recreated.
• SwarmUnlockRequest
• SystemAuthResponse
• SystemDataUsageResponse
• SystemInfo
• SystemInfoDefaultAddressPools
• SystemVersion
  Response of Engine API: GET "/version"
• SystemVersionComponents
• SystemVersionPlatform
• Task
• TaskSpec
  User modifiable task configuration.
• TaskSpecContainerSpec
  Container spec for the service.

  
  

  > Note: ContainerSpec, NetworkAttachmentSpec, and PluginSpec are > mutually exclusive. PluginSpec is only used when the Runtime field > is set to plugin. NetworkAttachmentSpec is used when the Runtime > field is set to attachment.
• TaskSpecContainerSpecConfigs
• TaskSpecContainerSpecDnsConfig
  Specification for DNS related configurations in resolver configuration file (resolv.conf).
• TaskSpecContainerSpecFile
  File represents a specific target that is backed by a file.
• TaskSpecContainerSpecFile1
  File represents a specific target that is backed by a file.

  
  

  > Note: Configs.File and Configs.Runtime are mutually exclusive

• TaskSpecContainerSpecPrivileges
  Security options for the container
• TaskSpecContainerSpecPrivilegesCredentialSpec
  CredentialSpec for managed service account (Windows only)
• TaskSpecContainerSpecPrivilegesSeLinuxContext
  SELinux labels of the container
• TaskSpecContainerSpecSecrets
• TaskSpecLogDriver
  Specifies the log driver to use for tasks created from this spec. If not present, the default one for the swarm will be used, finally falling back to the engine default if not specified.
• TaskSpecNetworkAttachmentSpec
  Read-only spec type for non-swarm containers attached to swarm overlay networks.

  
  

  > Note: ContainerSpec, NetworkAttachmentSpec, and PluginSpec are > mutually exclusive. PluginSpec is only used when the Runtime field > is set to plugin. NetworkAttachmentSpec is used when the Runtime > field is set to attachment.
• TaskSpecPlacement
• TaskSpecPlacementPreferences
• TaskSpecPlacementSpread
• TaskSpecPluginSpec
  Plugin spec for the service. (Experimental release only.)

  
  

  > Note: ContainerSpec, NetworkAttachmentSpec, and PluginSpec are > mutually exclusive. PluginSpec is only used when the Runtime field > is set to plugin. NetworkAttachmentSpec is used when the Runtime > field is set to attachment.
• TaskSpecResources
  Resource requirements which apply to each individual container created as part of the service.
• TaskSpecRestartPolicy
  Specification for the restart policy which applies to containers created as part of this service.
• TaskStatus
• TaskStatusContainerStatus
• ThrottleDevice
• TlsInfo
  Information about the issuer of leaf TLS certificates and the trusted root CA certificate.
• UnlockKeyResponse
• UpdateSecretOptions
  Parameters used in the Update Secret API
• Volume
• VolumeCreateOptions
  Volume configuration
• VolumeListResponse
  Volume list response
• VolumePruneResponse
• VolumeUsageData
  Usage details about the volume. This information is used by the GET /system/df endpoint, and omitted in other endpoints.

Enums

• ContainerStateStatusEnum
• EndpointPortConfigProtocolEnum
• EndpointPortConfigPublishModeEnum
• EndpointSpecModeEnum
• EventMessageScopeEnum
• EventMessageTypeEnum
• HealthStatusEnum
• HostConfigCgroupnsModeEnum
• HostConfigIsolationEnum
• LocalNodeState
  Current local status of this node. Enumeration of values. Since this enum’s variants do not hold data, we can easily define them them as #[repr(C)] which helps with FFI.
• MountBindOptionsPropagationEnum
• MountPointTypeEnum
• MountTypeEnum
• NodeSpecAvailabilityEnum
• NodeSpecRoleEnum
• NodeState
  NodeState represents the state of a node. Enumeration of values. Since this enum’s variants do not hold data, we can easily define them them as #[repr(C)] which helps with FFI.
• PluginConfigInterfaceProtocolSchemeEnum
• PortTypeEnum
• Reachability
  Reachability represents the reachability of a node. Enumeration of values. Since this enum’s variants do not hold data, we can easily define them them as #[repr(C)] which helps with FFI.
• RestartPolicyNameEnum
• ServiceSpecRollbackConfigFailureActionEnum
• ServiceSpecRollbackConfigOrderEnum
• ServiceSpecUpdateConfigFailureActionEnum
• ServiceSpecUpdateConfigOrderEnum
• ServiceUpdateStatusStateEnum
• SwarmSpecCaConfigExternalCAsProtocolEnum
• SystemInfoCgroupDriverEnum
• SystemInfoCgroupVersionEnum
• SystemInfoIsolationEnum
• TaskSpecContainerSpecIsolationEnum
• TaskSpecRestartPolicyConditionEnum
• TaskState
  Enumeration of values. Since this enum’s variants do not hold data, we can easily define them them as #[repr(C)] which helps with FFI.
• VolumeScopeEnum

Type Aliases

• BollardDate
• GenericResources
  User-defined resources can be either Integer resources (e.g, SSD=3) or String resources (e.g, GPU=UUID1).
• PortMap
  PortMap describes the mapping of container ports to host ports, using the container’s port-number and protocol as key in the format <port>/<protocol>, for example, 80/udp. If a container’s port is mapped for multiple protocols, separate entries are added to the mapping table.